Home > Plumbing > Septic & Drainage

How to Remove 4 Types of Sink Stoppers in 4 Steps

More than 310 people have received a free quote in the last 60 days.
Please enter valid zip
Get My Quote
Enter details in under 3 minutes.
Advertisement

Updated On

April 11, 2025

Why You Can Trust Us

Today’s Homeowner exists to help you maintain or improve your home safely and effectively. We uphold strict editorial standards and carefully vet the advice and resources referenced in our articles. Click below to learn more about our review process and how we earn money.

Learn More

A sink stopper is a small but essential part of your sink’s functionality. It lets you trap water for washing dishes, soaking laundry, or even cleaning makeup brushes.

But when your sink isn’t draining properly or the stopper gets stuck, knowing how to remove it can save you time and hassle. Fortunately, most sink stoppers can be removed with just a few basic tools like pliers or a screwdriver.

There are four main types of sink stoppers: pop-up, push-pull, flip-it, and toe-touch. Each type has a slightly different removal process, with some requiring a bit more effort than others. In this guide, we’ll walk you through how to remove each type of sink stopper step by step. While most homeowners can handle the process themselves, a plumber may be necessary if the stopper is jammed or if there are deeper plumbing issues.

Watch the video below to see how to remove a push-style bathtub stopper: 

Need a plumber’s help to remove a stuck sink stopper? Get in touch with local pros now with the widget below. 

Advertisement
Get Plumbing Estimates in Just 30 Seconds
Match with a plumbing expert to help you with installation or repair.
Please enter valid zip
Get Free Estimates

Key Takeaways

  • Removing a sink stopper is a simple process that most homeowners can handle on their own.
  • Pop-up sink stoppers take the longest to disassemble as they feature a more complex mechanism.
  • If you encounter issues with your stopper removal project or the bathroom sink drain itself, it’s best to contact a plumber.

How Do You Remove a Pop-Up Sink Stopper? (4 Steps)

Pop-up sink stoppers (drain plugs) are a common feature in bathroom sinks. They operate using a more complex mechanism than other stoppers we’ll discuss, employing clevis straps, pivot rods, spring clips, and gaskets to get the job done. 

When you pull up on the rod at the back of the faucet, the mechanism pulls the stopper downward, using the gasket to create a tight seal against the sink. When you push the rod down, it raises the stopper, lifting the gasket away from the sink and allowing water to drain. 

Follow the steps below to remove a pop-up sink stopper.

#1 Locate and adjust the lift rod and clevis strap under the sink

First, find the lift rod and clevis strap underneath the bathroom or kitchen sink. If you have a cramped base cabinet, clean it out and set stored objects aside before attempting to access the drain assembly. 

The clevis strap is a vertical component connected to the lift rod that feeds through the faucet. 

You may need to adjust this rod to detach the pivot rod. Adjust it higher or lower as needed.

#2 Unscrew and detach the pivot rod from the drain pipe

Next, you’ll need to unscrew the pivot rod from the drain pipe. When you remove the pivot rod, the sink stopper will drop into the drain, becoming flush with the sink and making it difficult to lift it out. Hold the stopper with one hand or place something underneath the lip to prevent it from sliding down when you remove the pivot rod. 

When you’re ready, unthread the nut connecting the pivot rod to the drain pipe. You may need to use channel-lock pliers to loosen the nut, although this will depend on how snugly it’s attached. Once you loosen the nut, work the pivot rod backward and pull it out of the drain pipe. 

#3 Pull out the sink stopper from the drain opening

After you remove the pivot rod from the drain pipe, the sink stopper can move freely in the drain. Lift it out of the drain opening by pulling up on the stopper. It should come out without resistance unless there’s a clog, as the pivot rod is what fixes it in place. If your sink drains slowly, take advantage of the open drain to clear out debris with a drain snake before reinstalling the stopper.

# 4 Clean and reinstall the sink stopper if needed

While you have the assembly out, clean any hair, gunk, or grime off the end of the pivot rod. Wash the stopper with cleaner and a scrub brush, ensuring you remove all gunk and debris. 

Examine each component for signs of damage or wear, replacing each part as necessary. When you’re done, reassemble the sink stopper if necessary. To reinstall the stopper, fit the stopper back into the drain. Insert the pivot rod into the drain pipe and feed it through the hole at the bottom of the stopper.

This step can take some trial and error, but you’ll know when you’ve attached it correctly when you can operate the drain as usual. Once you hook the stopper with the pivot rod, tighten the nut in place to secure the assembly. 

How Do You Remove a Push-Pull Sink Stopper? (3 Steps)

A push-pull sink stopper looks similar to a lift-and-turn stopper, often featuring a knob atop the stopper. The smooth, wide knob is fixed in place, allowing users to pull the stopper up or push it into place, hence the name. These stoppers have an incredibly simple mechanism, so removing them is easy — just follow the steps below. 

#1 Twist and pull up the sink stopper from the drain opening

Some push-pull sink stoppers have a detachable knob. To remove these models, you’ll need to remove the knob to access the mounting post. Simply grip the drain stopper in one hand and the knob in the other. 

Turn the knob clockwise (to the left) and unthread it from the stopper lid. This will reveal the fastening bolt. 

#2 Unscrew and remove the mounting post from the drain opening

Once you reveal the fastening bolt, use a screwdriver or pliers to unthread the bolt from the drain crossbar. After unthreading the stopper, you can lift it out of the drain. 

If you have a push-pull stopper without a detachable knob, the process is similar but doesn’t require as many steps. Instead of unthreading the knob to expose the fastening bolt, you can unthread the entire piece at once. Simply twist the entire drain stopper counterclockwise to unthread the hidden bolt from the drain crossbar. 

Once you unthread it, lift it out of the drain. 

#3 Clean and reinstall the sink stopper if needed

After you take the sink stopper out of the drain, inspect it for damage or debris. In many cases, hair, soap scum, and other grime build up on the stopper. While you have the stopper out, give it a good scrubbing with a brush and some cleaner. 

After cleaning the stopper and completing tasks that require the stopper out of the way, reinstall the stopper by retracing your steps. 

How Do You Remove a Flip-It Sink Stopper? (3 Steps)

Flip-it sink stoppers feature a flip lever that allows the gasket within the drain to expand or contract. When you flip the stopper into the open position, the gasket contracts, allowing water to flow through. When you flip the stopper into the closed position, the gasket expands, preventing water flow through the drain. 

The mechanism is simple and easy to operate, making the removal process a breeze. 

#1 Flip the sink stopper to the open position

First you’ll need to flip the sink stopper into the open position. This will allow you to get a better grasp on the stopper for removal. 

#2 Pry out the sink stopper from the drain opening

Once you open the sink stopper, grasp the lever firmly and twist the entire assembly while you pull upward. Lift up and away from the drain to remove the stopper. 

#3 Clean and reinstall the sink stopper

Lastly, examine the stopper for signs of damage and replace it if necessary. Otherwise, clean the stopper thoroughly to remove gunk and grime with a brush and cleaner. After cleaning the stopper, reinstall it in the drain. 

How Do You Remove a Toe-Touch Sink Stopper? (3 Steps)

A toe-touch sink stopper features a straightforward mechanism that activates with a simple push. When you push down the drain stopper, it’ll close, creating a tight seal against the bottom of the sink. On the second push, the drain reopens, allowing the sink’s contents to flow down the drain pipe. 

These stoppers usually feature a smooth, flat lid and may have the word “push” in the center. 

#1 Unscrew the cap of the sink stopper from the drain opening

Pop the drain into the open position by pressing it firmly. Once it’s open, grasp it and twist counterclockwise. Don’t apply excessive force, as you could break it. Instead, apply firm, steady pressure as you twist to ensure it unthreads smoothly. 

#3 Pull out the stem of the sink stopper from the drain opening

Once you unthread the stopper, use a set of pliers or a screwdriver to unthread the fastening screw from the crossbar. Lift the stopper out of the drain and set it aside. Remove the stem of the sink stopper after you unthread it. 

#4 Clean and reinstall the sink stopper

Clean the sink stopper and stem while you have them easily accessible using a brush and cleaner. Remove hair, soap scum, and other debris before reinstalling the sink stopper. 

So, What’s The Best Way To Remove a Drain Stopper?

When your drain goes on strike due to a clog or blockage, DIY removing the stopper to address the issue might be your best bet. While the process varies from one stopper to the next, it’s usually a simple project that most homeowners can handle. 

However, if you can’t remove your drain stopper or run into issues with your drain, it’s best to contact a professional. Some problems can be more complex than others, so help from a professional plumber might be your best bet. 

FAQs About Removing a Sink Stopper

Do you need to remove a bathroom sink stopper to replace a faucet?

Yes, in many cases. If your sink has a pop-up assembly, the stopper is connected to the faucet via a system of rods and levers. To install a new faucet, you’ll often need to disconnect the stopper mechanism. If your new faucet uses the same drain setup, you can reinstall the existing stopper, but if the designs don’t match, you may need to replace the entire drain assembly.

How do I remove the sink stopper from the bathtub drain?

The removal process depends on the type of bathtub stopper. Most bathtubs use either a toe-touch or lift-and-turn stopper. For a toe-touch model, simply push it down to open, then twist it counterclockwise to unscrew it from the drain. If it’s a lift-and-turn stopper, hold the stopper and twist the knob counterclockwise until it loosens and can be lifted out. If the stopper is stuck, try using a plunger or suction cup to dislodge it.

How do you remove a sink stopper by removing the metal ring?

You don’t need to remove the metal ring (also called the drain flange) to take out the sink stopper. First, remove the stopper itself by following the method specific to your stopper type. If you do need to remove the drain flange—such as when replacing the entire drain assembly—you’ll likely need pliers and plumber’s putty to properly reseal it afterward.

Editorial Contributors
avatar for Jonathon Jachura

Jonathon Jachura

Contributor

Full Bio

Full Bio

Jonathon Jachura is a two-time homeowner with hands-on experience with HVAC, gutters, plumbing, lawn care, pest control, and other aspects of owning a home. He is passionate about home maintenance and finding the best services. His main goal is to educate others with crisp, concise descriptions that any homeowner can use. Jon uses his strong technical background to create engaging, easy-to-read, and informative guides. He does most of his home and lawn projects himself but hires professional companies for the “big things.” He knows what goes into finding the best service providers and contractors. Jon studied mechanical engineering at Purdue University in Indiana and worked in the HVAC industry for 12 years. Between his various home improvement projects, he enjoys the outdoors, a good cup of coffee, and spending time with his family.
avatar for Lora Novak

Lora Novak

Senior Editor

Full Bio

Full Bio

Lora Novak meticulously proofreads and edits all commercial content for Today’s Homeowner to guarantee that it contains the most up-to-date information. Lora brings over 12 years of writing, editing, and digital marketing expertise. She’s worked on thousands of articles related to heating, air conditioning, ventilation, roofing, plumbing, lawn/garden, pest control, insurance, and other general homeownership topics.
Search Plumbing Companies in Your Area